3 Series E36 316i (M43) COUPE
11 12 000
Removing and installing, sealing cylinder
head cover (M43 / M43TU)
Unscrew cover bolts and remove cylinder head cover.
Note:
Cylinder head cover is separated from cylinder head by rubber
mounts and seals to insulate it from vibration.
Carefully note arrangement of cover retaining fixture.
1 Cap screw
2 Shim
3 Rubber
Installation:
Check cylinder-head-cover seal and replace if necessary.
Pre-install cylinder-head-cover seal at cylinder head cover.
RA Removing and installing, sealing cylinder head cover (M43 / M43TU)
BMW AG - TIS
19.01.2013 11:24
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
