3 Series E46 318Ci (M43TU) COUPE
11 61 040
Removing and installing manifold upper
section (M43TU)
E46 only
Remove microfilter. Release screws (1) and remove lower section
of microfilter housing (2).
Release bellows, remove bellows with air-mass flow sensor.
Remove Bowden cable for throttle actuation from throttle,
refer to 35 41 421.
Unscrew front manifold support.
Pull off vacuum hose (1).
Unscrew rear manifold support.
RA Removing and installing manifold upper section (M43TU)
BMW AG - TIS
29.01.2013 23:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -