3 Series E46 325xi (M54) SAL
Remove control arm holder on both sides from front axle carrier.
Tightening torque 31 12 10AZ
.
Unscrew left and right bolts.
Tightening torque 31 12 8AZ
.
Remove power steering gear from front axle carrier and tie up.
Installation:
Replace self-locking nuts.
Tightening torque 32 00 1AZ
.
Support front axle carrier in middle with workshop jack.
Remove front axle carrier on both sides from engine carrier.
Lower front axle carrier and remove.
Installation:
Check threads for damage; if necessary, repair with Helicoil thread
inserts.
First tighten down bolts (1) on both sides - taper connected free
from paint.
Tightening torque 31 10 1AZ
(bolt (1)).
Tightening torque 31 10 11AZ
(bolt (2)).
RA Replacing front axle carrier (AWD)
BMW AG - TIS
14.02.2013 13:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -