bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

12 RA Removing And Installing _ Replacing Front Underbody Protection > < 10 RA Removing And Installing _ Replacing Front Carpet For Passenger Compartment|Page 1877
Page 1
background image

51 47 440

Removing and installing/replacing rear carpet
on seat pan

Necessary preliminary tasks:

Remove left/right front seat

Remove storage compartment

Remove handbrake lever

Remove rear side trim left/right

Remove inside entrance cover strip

Version with central bass speaker:

Remove central bass speaker trim on left/right

E92 only:

Lever out cap (1).

Release bolt (2).

Tightening torque 72 11 5AZ

.

Feed out belt and slide bar.

Installation:

Make sure slide bar and grommet are correctly positioned.

Check that spacer bushing (3) and rubber ring (4) are in correct
position.

Remove holder (1).

Pull back cable (2) with cable holder (3).

Feed out carpet (4).

Installation:

Make sure openings for air duct and attachment points are
correctly positioned.

RA  Removing and installing/replacing rear carpet on seat pan

BMW AG - TIS

21.01.2013  06:26

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

12 RA Removing And Installing _ Replacing Front Underbody Protection > < 10 RA Removing And Installing _ Replacing Front Carpet For Passenger Compartment|Page 1877