bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

3 RA Replacing A_C Compressor (N54)|Page 2675 > < 2 RA Instructions For Opening And Replacing Parts In Refrigerant Circuit|Page 2673
Page 1
background image

64 52 521

Replacing A/C compressor (N54)

Warning!

Risk of injury!

Refrigerant circuit is under high pressure!

Follow safety instructions for handling refrigerant

Follow safety instructions for handling refrigerant oil.

Avoid contact with refrigerant and refrigerant oil.

Important!

Risk of damage!

Restart engine only when A/C system has been correctly
filled.

Read and comply with notes on replacing compressor. 

Follow instructions for opening and replacing parts in
refrigerant circuit!

 

If A/C system is opened for more than 24 hours:

Replacing drier insert for A/C system

Necessary preliminary tasks:

Drawing off, evacuating and filling the A/C system are not

included in the time value given for this work operation

Remove left charge-air duct 

Remove A/C compressor drive belt

Release screw (1) and remove refrigerant line.

Installation:

Tightening torque 64 52 1AZ

.

Replace sealing ring and moisten with refrigerant oil.

RA  Replacing A/C compressor (N54)

BMW AG - TIS

12.02.2013  15:27

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

3 RA Replacing A_C Compressor (N54)|Page 2675 > < 2 RA Instructions For Opening And Replacing Parts In Refrigerant Circuit|Page 2673