bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

3 RA Removing And Installing Or Replacing An Injector (N54, N53)|Page 554 > < 2 RA Removing And Installing Or Replacing A High-pressure Line (N54, N53)|Page 552
Page 1
background image

13 53 310

Removing and installing or replacing an
injector (N54, N53)

Special tools required:

13 0 180

13 0 191

13 0 192

13 0 193

13 0 194

13 0 195

13 5 250

37 1 151

Warning!

Observe warning on cylinder head cover.

Disconnect battery negative terminal (risk of fire due to short-
circuiting on removal).

Electric fuel pump starts up automatically each time door is
opened!

Carry out installation work on fuel system only with coolant
temperature below 40 

°

C.

Warning!

Wear full face guard and protective gloves.

Fuel can emerge spontaneously at high velocity from the fuel
injectors!

To reduce the fuel pressure, place rag over fuel injector and
carefully tap against the fuel injector with a spanner.

There is a risk of injury if the fuel pressure is not reduced!

RA  Removing and installing or replacing an injector (N54, N53)

BMW AG - TIS

12.02.2013  02:21

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

3 RA Removing And Installing Or Replacing An Injector (N54, N53)|Page 554 > < 2 RA Removing And Installing Or Replacing A High-pressure Line (N54, N53)|Page 552