5 Series E34 525tds (M51) TOUR
11 66 000
Removing and installing or replacing vacuum
pump (M51)
Removing cylinder head cover,
refer to 11 12 000
Unfasten vacuum hose from vacuum pump.
Remove screw (1).
Remove screw (2), lift out pump.
Note:
Screw (2) also serves as bracket for chain guide.
Installation:
Thread of screw (2) is coated with sealing compound so use
new screw or apply 3 Bond 1209,
see BMW Parts Service.
Installation:
Install driver in recess on camshaft gear.
RA Removing and installing or replacing vacuum pump (M51)
BMW AG - TIS
24.01.2013 10:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -