X Series E83 X3 3.0Si (N52K) OFFRD
34 52 550
Removing and installing / replacing DSC
sensor
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Necessary preliminary tasks:
•
Remove storage compartment
Note:
The DSC sensor contains the functions of the transversal
acceleration sensor and the yaw sensor.
Unfasten plug connection (1).
Installation:
Make sure plug connection locks correctly.
Release screws (2) and remove rotation rate sensor.
Installation:
Tightening torque 34 51 3AZ
.
Carry out calibration/adjustment of DSC sensor.
RA Removing and installing / replacing DSC sensor
BMW AG - TIS
21.02.2013 10:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
