3 Series E46 320Cd (M47TU) CONVER
54 21 ...
Adjusting hard top
Necessary preliminary tasks:
-
Fit hard top
Adjustments at rear fastener:
Lateral adjustment (Y-axis)
-
Release nuts (1) on left and right.
-
Align hard top in "Y" direction symmetrically
Vertical adjustment (Z-axis)
-
Release nut (1) and adjust height clearance "Z" between
hard top and body with nut (2)
Longitudinal adjustment (X-axis)
-
Release screws (3).
-
Adjust hard top in "X" direction
Adjustments at front fastener:
By removing or adding shims, it is possible to align the hard top to
the cowl panel:
A) vertically
B) longitudinally to the vehicle
Installation:
-
Screw on hard top fasteners loosely.
-
Fit hard top and lock carefully
-
Check hard top in (A) and (B)
-
Unlock hard top and remove carefully.
-
If necessary, add or remove shims
-
Tighten down screws and nuts.
RA Adjusting hard top
BMW AG - TIS
12.02.2013 11:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -