5 Series E39 525tds (M51) TOUR
13 53 320
Removing and installing or replacing all
injector nozzles (M51)
Removing manifold for intake air,
refer to 11 61 050
Disconnect and remove pipe spacer.
Pull off leak oil hoses using a pliers.
Note:
Replace leak oil hoses after disassembly.
Unscrew cap nut with special tool 13 5 020.
Tightening torque, refer to Technical Data 13 53 3AZ
Note:
Reposition special tool in good time to avoid bending the
pipes.
Plug openings with caps.
Loosen coupling nuts on injection pump. Counterhold on pressure
valve if necessary.
Installation:
Tightening torque, refer to Technical Data 13 53 3AZ
RA Removing and installing or replacing all injector nozzles (M51)
BMW AG - TIS
20.02.2013 03:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -